a scroll compressor (1) is provided with fluid deflection inhibiting weights (81, 82, 83) for inhibiting the deflection of a crank shaft (40) in the fluid load direction.
disclosed is a wave gear device (1) for setting the flexible state of the principal section (30) of a flexible external gear in a non-deflection state (at a deflection coefficient ϰ = 1).
the purpose of the invention is to perform correction of a contour deformation attributable to a tire deflection on tire contour measurement data in order to correctly perform a visual inspection on a tire having deflection.
when the deflection of the elastic plate member (10) is released, the elastic plate member is returned from the deflected state to the original state while generating small impact noise and vibration.
the backlight chassis resists deflection as a whole.
the first bending axis and the second bending axis extend so that the engagement protrusion is located between the first bending axis and the second bending axis.
the holding member (10b) has a bend piece (16) including a locking part (16c) capable of bending and displacing.
the elastic piece section has a long piece section, a turned-back section, a first bending axis, and a second bending axis.
positioning with satisfactory accuracy can be conducted because there is no bending.
to prevent damage to the inner surface of the test pipe due to bending of the linear member that supports the drift mandrel.
the rail retaining device is also provided with a moment generation member which generates a moment that works to correct flexure in the guide rail caused by horizontal loads.
flexure amounts of the anode electrode (4) and the cathode electrode (12) are identical with each other when they flex freely with its own weight and maximum flexure of the electrodes (4, 12) are also identical with each other.
a pulling part (30) pulls and stretches the bent part (200b).
a contact with the optical disc due to warping is eliminated.
the external member (17) has: a bendable tube section (24) and a straight tube section (25) having higher rigidity than the bendable tube section (24).
preferably, the step of displaying the partially bent image includes a step of forming the partially bent image by the user performing pinching or spreading as input.
the screen mask (12) can be prevented from sagging downward, and accumulation of paste on the screen mask (12) caused by sagging can be prevented.
thereby, time and effort for maintenance can be reduced.
the linear grinding material (11a) is difficult to bend in the diagonal direction of the cross-section.
the linear grinding material (11b) and the linear grinding material (11c) are difficult to bend in the long direction of the cross-section.
a backlight device in which, even if an optical sheet is curved, the nonuniform luminances and shade are prevented or reduced from occurring due to the curve.
disclosed is a small, thin, lightweight flexurally vibrating actuator that is suitable for use in a touch panel, is resistant to damage from falling, and provides improved yield.
also disclosed is a force-feedback-equipped touch panel using the aforementioned flexurally vibrating actuator.
an implement (20) for training facial muscle is provided with: an elastically deformable flexible portion (21); and a mouth-held portion (24) provided in the center of the flexible portion (21) and held using the lips.
in this vehicle seat, a force-bearing member (40) against which a passenger places his/her back is supported by a seat-back frame (20) of a seat back, via an upper connecting wire (41), so as to be able to deflect forwards and backwards.